MB200 Slab Flattener


Get prices & info!

Main Features

Electric motor

2.9 kW (3.9 HP) Electric motor 3x400V

Heavy-duty knife profiles

Heavy-duty welded steel frame

adjustable clamps

4 adjustable clamps for material clamping

adjustable leveling legs

8 adjustable leveling legs with 76 to 83 cm adjustable table height

Adjustable cutting depth

Adjustable cutting depth from 0,40 mm to 3,17 mm

Control panel

Control panel features variable feed rate and On/Off switch

Manual feed or powered

Manual feed or powered cutter head directional controls with variable feed speed

Dual-Chain feed system

Dual-Chain feed system

dust port

Standard 1016 mm dust port

Orbital sanding head

Orbital sanding head(Random orbit sander head with velcro)

Cutter head

Cutter head includes five 4-sided carbide knives

Modular table sections

Modular table sections for easy shipping and extending

The SlabMizer MB200 Slab Flattener efficiently surfaces and flattens wood slabs, boards, burls, cookies, and other wide material with minimal labor. Compared to a traditional router or planer, the SlabMizer flattens wider and thicker material in less time using powered cutter head directional controls with variable feed speed. For larger capacity, 1520 mm table extensions can be added to extend the material length.

Material is secured on the heavy duty, welded steel frame by 4 adjustable clamps. To adjust the cutting depth, a hand crank located on the top of the cutter head is adjusted from 0,40 mm to 3,17 mm in 0,40 mm increments.

The cutter head is engaged and operated by a powered control console that can be used from any side of the machine or detached from the stand for handheld use. Powered controls include on/off, variable feed speed, and a joystick direction control for the X and Y axis for finishing material with or against the grain.

The cutter head can also be operated manually with a handle. Once both sides of the slab are surfaced, fine finishing is accomplished by using the 177 mm orbital sanding head attachment for the desired finish. Dust from the operation is easily removed with a 1016 mm diameter extraction port on top of the cutter head that can be connected to a dust extraction system.


Power 2.9 kW (3.9 HP) Electric Motor - 16A 3x400V 50 Hz
Max. Material Width 1420 mm
Min. Material Width 0 mm or 76 mm
(depends of clamp type)
Max. Material Thickness 203 mm
Min. Material Thickness 12 mm
Max. Material Length 3962 mm
(Optional bed extension - 1520 mm)
Min. Material Length 558 mm
Max. Depth of Cut 3,17 mm
Min. Depth of Cut 0,40 mm
Cutter Head five 4-sided knives
Sanding Head 177 mm (random orbit sander head with velcro)
Cutter Head Speed 3950 RPM
Feed Motor 0,18 kW
Machine Length 460 cm
Machine Width 153 cm
Table Height 76 - 83 cm (Adjustable with 8 Leveling Legs)
Max. Machine Height 181 cm