Offering more automation and features to reduce production costs, the SLP2 is the next stage in increasing profits from small- to medium-sized logs up to 400mm in diameter.
The line can be configured in different ways depending on product requirements and budget. As few as two or three workers can successfully manage the whole line due to its level of automation. A centralised control console positioned at the front of the line gives the main operator a full view of the work, and puts all machine controls within easy reach.
The SLP2 line:
• Costs less than similar lines.
• Requires low installation costs and requirements.
• Produces less waste and more product.
• Lowers power consumption.
• Is inexpensive to maintain.
The SLP2 is the ultimate solution for decreasing costs and increasing profits by automating your timber processing.
The TVS (Twin Vertical Saw) uses thin-kerf blades to efficiently remove the two vertical sides of logs up to 400mm in diameter. The TVS is cost-effective, versatile, designed for high performance, and built strong for years of reliable service. The TVS works equally well as a stand-alone unit or integrated with an existing sawmill line.
The spiky chain feed system with heavy, spiked top-rollers adds greater stability to the log as it goes through the TVS. Logs can be loaded onto the feed chain with little or no gap between them. This option is ideal for increasing productivity with straight and curved logs.
For squaring up timber which already has two flat cut surfaces, a flat feed chain is available with heavy, spiked top-rollers. This is commonly used when two TVS units are used in line together. Another popular use for the TVS is for the slab recovery line. Large slabs can be put through the TVS and then fed down to a resaw or multi head resaw.
This quality, single-head resaw was designed to run all day for years with minimal maintenance. The compact size and simple operation will fit seamlessly into high production log processing lines.
Ideal for companies that need a large capacity, heavy-duty multi-head resaw, the HR700’s modular design makes it easy to expand from one to a maximum of six heads as their demands change. In its maximum six head configuration, the HR700 converts large cants into six boards and one slab in one pass.
The EG300 combines the functions of both an edger and a multirip into one machine. The EG300 maximises recovery from each board and increases overall productivity of your sawmill by 20-30%.
Designed to make loading the log deck with a forklift easier and more efficient. It also increases log capacity on the deck, thus minimising loading runs.
Roller Conveyors with drive module - 600 mm wide
Roller Conveyors with drive module - 1000 mm wide
Roller Conveyors with drive module - 1300 mm wide
Cross side chain conveyor / log separation
Chain Conveyor with drive
Chain Conveyor with board singler
Chain Incline Conveyor for slabs with drive
Chain Horizontal Conveyor with drive
Chain Conveyor - slab removal conveyor behind CC1
Belt Conveyor with drive
Belt Conveyor behind CC1
SLP Log Deck
Sawmill Log Deck
SLP Incline Log Deck