Automatic Tooth Setter / Single – BMT300
The BMT300 industrial toothsetter is designed for professional blade sharpening businesses and large sawmill companies. Maximum blade width is 75mm, and the feed rate is up to 24 teeth per minute.
The BMT300 pneumatic setter ensures extreme tooth setting accuracy and consistency. An electronic control panel displays all parameters and diagnostic tools. Simply install the blade, and start the setter in the mode you wish to run. When one side of the blade is finished, invert the blade, re-install it in the setter, and move the blade pusher into the reverse position.
Several different modes and functions allow flexibility with how the setter will operate and the parameters that it will use. Inspection Mode simply checks the set on the teeth. Regular setting modes can detect set patterns, and bend back overset teeth automatically. After setting the blade, the setter will stop, or will double-check the blade to ensure that the set is exact. Tolerances for minimum and maximum set can be adjusted.
The BMT300 is designed as the toothsetting companion for the BMS500 blade sharpener for companies with multiple band sawmills in operation as well as for ReSharp service centres whose business is based on blade maintenance.
Dual Tooth Setter / with Electric Feed System – BMT250
The BMT250 dual toothsetter semi-automatically sets of both sides of your blades with high quality and efficiency.
The BMT250 is equipped with electric power feed that keeps the blade moving smoothly forward until all teeth are set.
The BMT250 can be adjusted to set blades 25mm-75mm wide, and from 13mm to 32mm tooth spacing. The BMT250 is controlled with a central control panel that features an automatic tooth counter, which stops when all teeth have been set.
The gauge precisely measures the set in each tooth to ensure your tooth set is accurate and ready to cut like a new blade again.
Dual Tooth Setter / Manual crank – BMT200
Set both sides of your blade at the same time easily with the manual BMT200 toothsetter, which will help you extend your blade’s sharp life and get the most accurate cut of timber.
The BMT200 is designed for affordable blade tooth setting. One turn of the crank sets two teeth and moves the blade forward at the same time.
The BMT200 handles 25mm-75mm blades, can set from 13mm to 32mm tooth spacing, and can finely adjust tooth space indexing. The gauge precisely measures the set in each tooth to ensure your tooth set is accurate and ready to cut like a new blade again.
Crank Tooth Setter – BMT150
Set both sides of your blade at the same time easily with the manual BMT150 toothsetter, which will help you extend your blade’s sharp life, improve cutting performance, and get the most accurate cut of timber.
The BMT150 is designed for affordable blade tooth setting. As the operator pulls the handle back he sets both teeth and as the operator pushes the handle forward he indexes the blade forward to set the next set of teeth. This cycle continues until the blades is completely set. One cycle sets all blade teeth. There is no need to invert the blade.
The BMT150 handles 25mm-76mm blades, can set from 6mm to 32mm tooth spacing, and can finely adjust tooth space indexing. A set gauge is included standard and precisely measures the set in each tooth to ensure your tooth set is accurate and ready to cut like a new blade again.
Crank Tooth Setter – BMT100
The BMT100 is designed for simple, accurate, and affordable blade tooth setting.
Simply manually advance the blade and set one side at a time. The guage precisely measures set in each tooth to ensure your tooth set is accurate and ready to cut like a new blade again. Once one side of the blade is completed, invert the blade and set the alternating teeth.
Adjustable blade arms allow you to handle 25mm – 50mm blades, and indexing pawls support various blade profiles. The set point can be adjusted if required.
For the individual who has low volume but who needs to ensure consistent set, the BMT100 is a great way to get started.